PRODUCT DESCRIPTION. Dura-Plate PW Multi-Purpose epoxy is a modified epoxy phenalkamine, certified by NSF to Standard 61 as a. Dura-Plate Multi-Purpose Epoxy is a modified epoxy phenalkamine, formulated specifically for immersion and atmospheric service in marine and. The Sherwin-Williams Company. Dura-Plate Multi-Purpose Epoxy. PRODUCT DESIGNATIONS. Dura-Plate (B67HA/B67VB). MIL-PRF-
|Published (Last):||6 October 2004|
|PDF File Size:||14.6 Mb|
|ePub File Size:||6.83 Mb|
|Price:||Free* [*Free Regsitration Required]|
By enlisting the services of engineering firm Howard R.
Daytime winter temperatures in Iowa City are routinely in the 30s, but may plummet after dark, so low temperature tolerance was another important factor in product selection. This aquifer covers nearly all of the state of Iowa and is used by many communities as a major water supply source.
Because construction was scheduled to take place during winter months, some of the coatings applied had to duraplatee tolerant of low temperatures. Ten years in planning, the new water plant went online percent on March 7,designed to better serve Iowa City’s growing population. As weather and temperature conditions improved, Dura-Plate continued to be used on interior PVC piping, duraplafe, conduit and other galvanized and concrete surfaces throughout the water treatment facility.
The plant uses a combination of surface and ground water sources for better overall water quality. The masonry contractors prepared interior concrete surfaces by “rubbing” or “sacking” after the placement and the removal of the formwork.
We needed something that was duarplate and easy to wash down,” says Bradbury. With its greater water treatment capacity, the new facility is another tool for attracting to the Iowa City area companies requiring large amounts of water.
These varied substrates all needed to receive coating systems that would be pleasing to workers and visitors alike, illustrating that this community is interested in combining function along with eye-catching design. The previous treatment plant, which the new facility has replaced, was durap,ate years old. Among the regulations that created the need for new plant construction were lower maximum contamination levels MCLs on inorganic chemicals, organic byproducts, and radionuclides, according to Shaun Bradbury, special projects manager of Iowa City.
Acrolon HS is a two-component, low VOC, acrylic polyurethane coating designed for high performance protection when maximum exterior gloss and color retention is needed. For further information, phone The selection of protective coating systems was a critical consideration of Howard R. Improving taste and odor was a goal to improve the aesthetic quality of our water. Green Company, the city sought to create a structure that would meet its immediate and future requirements for the next 50 to durapltae.
As home to the University of Iowa, Iowa City lays claim to many “big duraplae attributes: All coating systems maintained a DFT between 6 – 10 mils. Iowa City’s population fluctuates dkraplate due to the arrival and departure of its college students — some 30, in number — during the year. Green Company to ensure long-term corrosion protection and chemical resistance. By taking a combination of water durapkate the river and the aquifers, we are protected against potential contamination from any one source.
Dura-Plate® 235 Multi-Purpose Epoxy
A man-made lake located on the plant site will provide a supplementary duraplatee of water. As a result, water consumption and treatment fluctuate. It also is suitable for use in USDA-inspected facilities. All projects must have been in the design durapplate construction phase over the durapltae 18 months. After the surface was prepared, two coats of the multi-purpose epoxy were applied at 4 – 6 mils dry film thickness DFT per coat on interior concrete walls and ceilings as well as steel columns, beams, and stair stringers.
The new plant was constructed with concrete and houses several steel and fiberglass processing tanks and storage vessels. Dura-Plate was submitted and approved, according to Dave Kelchen, Sherwin-Williams Industrial and Marine Coatings specialist, because the product is specifically engineered and formulated to control corrosion and provide maximum durability and resistance to frequent water washdowns, chemical solvents, and abrasives.
More than 13, yards of cast-in-place concrete duaplate utilized in the plant’s construction. According to Mohling, the epoxy’s low temperature properties allowed his crew to work unhindered despite the temperature, and to obtain the required film build and spread rate.
Specialty coating required in containment areas In areas where even greater chemical protection was required, Sherwin-Williams Shelcote II was specified, duralate to Duben. This process provides a dense, uniform surface that is rougher than that provided by steel troweling and ready to paint immediately after drying and curing.
It is also designed duraplatte meet ever-increasing state and federal drinking water quality standards, and to improve the taste and odor of the water supply for the area’s Hawkeye State citizens.
In areas where even greater chemical protection was required, Sherwin-Williams Shelcote II was specified, according to Duben. Two coats of this high performance epoxy were then applied to a 5 to 6 mil, DFT per coat.
Before the treatment plant was closed in, some initial painting occurred during the coldest months of the year in Iowa City.
In addition, the protective coating systems for this project were also intended to enhance operation and maintenance efficiency. If you can keep the facility cleaner, it’s much easier to maintain the quality of the water. Rick Snyder made the call to stop distributing water.
NSF-Approved Dura-Plate® Coatings From Sherwin-Williams
This was particularly helpful on this project, because city officials emphasized the importance of cleanliness and maintenance efficiency as they likened their plant requirements to the strict standards typical of food processing environments.
Brown Water in Indiana Town.
For long-term corrosion protection, and the ability to maintain the plant’s “clean” appearance, high performance epoxy coatings from Sherwin-Williams duaplate selected for these surfaces. The new plant’s compact design and significant use of concrete construction, including two two-million-gallon storage reservoirs, distinguish the Iowa City water treatment facility.
The majority of water comes from four horizontal collector wells with direct intake from the Iowa River.
Duben specified Shelcote II — a high-solids, amine cured epoxy coating designed for resistance to a broad range of aqueous and petroleum-based chemicals including MTBE. Business News Round Up – Dec.
Dura-Plate is an epoxy phenalkamine 2335 specifically for service in industrial and marine environments. Water is also supplied by four shallow alluvial aquifer wells and one deep well that penetrates the bedrock of the Jordan aquifer. A computer glitch at a filtration plant may have allowed minerals to seep into the water turning the water brown in Lake Station, Ind. This is in addition, of course, to fulfilling the facility’s primary aim: Rubbing a concrete surface with additional concrete or grout is done to prevent the formation of holes and duraplwte.