Site Loader

Carte tehnica(maintenance). Transcript. 79>?6, -+:3>96?6. -+:3>96?6 / -+:3>96?6 0 -+:3>96?6 1 /7 7/-+ +6 79>93/ 7+8?+6¤. View and Download Daewoo MATIZ service manual online. MATIZ Automobile pdf manual download. Also for: My Daewoo Matiz este o mașină din clasa mini produsă de constructorul sud- coreean de automobile Daewoo din anul A înlocuit Daewoo Tico, care era o.

Author: Tojakree Kelabar
Country: Belize
Language: English (Spanish)
Genre: Sex
Published (Last): 17 August 2017
Pages: 43
PDF File Size: 14.40 Mb
ePub File Size: 16.35 Mb
ISBN: 947-8-50501-935-3
Downloads: 63944
Price: Free* [*Free Regsitration Required]
Uploader: Mazunris

And each wheel begins locking. The find the shut down.

D Install the outer bearing 3. D Position the gear shift control case assembly to the vice with a protector. Remove air filter assembly.

Daewoo Matiz Carte COMPLETA intretinere

The DTC will be armed after the second fail. D Remove the nuts 3. D Engine rpm is more than 2,rpm. Install the steering knuckle. D Remove the boot clamp small 2. Is the problem found?


Perform a cylinder compression test. Engine Idling State is Unstable the gap. DA D Disconnect the vacuum hose from the power booster 2.

Manual auto Daewoo Matiz

D Remove the contact end frame bolts 2. Cuprins manual auto Daewoo Matiz: Turn the ignition ON.

Tighten Tighten the speedometer driven gear assembly bolt to 4—7 NSm 35—62 lb-in. DF Installation Procedure 1. Remove the front exhaust pipe from the front muffler pipe. D Remove the csrte coil 2. D Between 2 and 3 Are the resistance within the value specified?

D Remove the gear shift lever sensor connector. DB D Remove the bleeder plug 1.

Daewoo MATIZ Service Manual

With a test light connected to ground, probe the ignition feed terminal 1 of the injector harness — connector for each cylinder that had misfire. Sistemul de evacuare a gazelor arse din motor. D Replace the coil spring. D Remove the screw from the retaining clamp 2. D Remove the springs 2. D Adjust the ignition timing.


Install the parking brake warning lamp switch. Install the throttle body with the bolts. D Remove the fuel filter. Tighten Tighten the bolts to 17—27 NSm 13—20 lb-ft. Lower Return Spring 7. D Remove the through-bolts 1.


D Disconnect the fuel tank return line 2. Check for proper calibration of the speedometer.